Subaru Forester: Fuses and circuits
Fuse panel located in the passenger compartment
Fuse panel located in the engine compartment
A) Main fuse
Bulb chart
Lights A and B are the LED (Light Emitting Diode) type. Consult your SUBARU dealer for replacement.
- Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury.
- For models with HID low beam headlights, observe the following precautions. Not doing so carries the risk of an electric shock that could result in serious injury because the HID bulbs use an extremely high voltage.
– Do not replace any headlight bulbs (both low beam and high beam) by yourself.
– Do not remove/restore the headlight assemblies by yourself.
– Do not remove any headlightassembly components by yourself.
For replacement, contact your SUBARU dealer.
Replace any bulb only with a new bulb of the specified wattage. Using a bulb of different wattage could result in a fire.
Vehicle identification
Vehicle identification
1) Vehicle identification number
2) Emission control label
3) Tire inflation pressure label
4) Certification label
5) Vehicle identification number plate
6) Model number label
7) Fuel label
8) Air conditioner label
See also:
Four wheel drive (4WD)
Engine power can be delivered to all front and rear wheels for maximum traction.
Full-time 4WD is useful when extra traction is required on road, such as, when driving
on slippery, muddy, wet, or snow-covered roads. These vehicles are not desig ...
Seat
Driver’s seat 1
Seat adjustment, forward / backward 2 Seatback recliner 3 Seat adjustment, height*
4 Seat heater switch* 5 Headrest adjustment Front passenger seat 6 Seat adjustment,
forward / backward 7 Seatback recliner 8 Seat heater switc ...