Subaru Forester: Power and audio controls

Subaru Forester / Subaru Forester 3rd Gen Owner's Manual / Audio / Power and audio controls

Power switch and volume control

The dial is used for both power (ON/OFF)

The dial is used for both power (ON/OFF) and volume control. The radio is turned ON and OFF by pushing the dial, and the volume is controlled by turning the dial.

Sound controls and audio settings

NOTE
- SPEED VOLUME CONTROL is a function that automatically adjusts the volume according to the vehicle speed.

As the vehicle speed increases, the audio volume automatically increases to match the vehicle speed, in order to create a pleasant listening environment even as the driving noise increases.

- For type B audio, SRS CS Auto is equipped. SRS CS Auto creates a 5.1ch equivalent surround field using 6 or 7 speakers that are installed in the vehicle.

- For type D audio, SRS TruBass and FOCUS are equipped.

- SRS Sound features:
(1) Sound originating from door mount speakers can be heard at ear level (built in SRS FOCUS effect) (type B and D audio).

(2) Ultra rich bass sound can be obtained from standard door mount speakers (built in SRS TruBass effect) (type B and D audio).

(3) Surround sound can be obtained from 2-channel stereo sources such as CD, MP3 and FM (built in SRS Circle Surround II effect) (type B audio).

(4) SRS CS Auto can position the center channel image in the center of the vehicle’s windshield. This eliminates the need for a center speaker (built in SRS Circle Surround II phantom center and SRS FOCUS effects) (type B audio).

- CS Auto, SRS and “trademarks of SRS Labs, Inc.” symbol are trademarks of SRS Labs, Inc.

- CS Auto technology is incorporated under license from SRS Labs, inc.

- TruBass, FOCUS, SRS and “symbol are trademarks of SRS Labs,” symbol are trademarks of SRS Labs, Inc.

- TruBass and FOCUS technologies are incorporated under license from SRS Labs, Inc.

Tone and balance control (type A, B and C audio)

Tone and balance control (type A, B and C audio)

Each brief press of the “TUNE/TRACK/

Each brief press of the “TUNE/TRACK/ CH” dial changes the control modes in the following sequence.

Choose the preferred level for each mode

Choose the preferred level for each mode by turning the “TUNE/TRACK/CH” dial.

The control function returns to the tune/ track/channel control mode after approximately 5 seconds.

Other settings (type A, B and C audio)

Each brief press of the “MENU” button

Each brief press of the “MENU” button changes the control modes in the following sequence.

Type A audio:

Type B audio:

Type B audio:

Type C audio:

Type C audio:

Choose the preferred settings for each

Choose the preferred settings for each mode by turning the “TUNE/TRACK/CH” dial.

The control function returns to the tune/ track/channel control mode after approximately 5 seconds.

Audio settings (type D audio)

1. Press the “TUNE/TRACK/CH” dial to display “SETTING Menu”.

2. Operate the “TUNE/TRACK/CH” dial to select the preferred menu. You can select the menu as shown in the following chart.

3. Operate the “TUNE/TRACK/CH” dial

3. Operate the “TUNE/TRACK/CH” dial to select the preferred setting for each mode.

NOTE
Only “Screen OFF” can be displayed while driving.

Adjustable level of each mode

*: For type A and B audio, AUX volume can be adjusted only when an AUX audio

*: For type A and B audio, AUX volume can be adjusted only when an AUX audio product is connected.

Audio set
FM/AM radio operation

See also:


Automatic transaxle
Automatic transaxle operation All normal forward driving is done with the shift lever in the D (Drive) position. To move the shift lever from the P (Park) position, the brake pedal must be depressed and the lock release button must be depress ...

Electronic compass (if equipped)
The compass heading is displayed in the center stack display. The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic or metallic objects placed in, on or near the ve ...