Subaru Forester: If you park your vehicle in case of an emergency

The hazard warning flasher should be

The hazard warning flasher should be used in day or night to warn other drivers when you have to park your vehicle under emergency conditions.

Avoid stopping on the road. It is best to safely pull off the road if a problem occurs.

The hazard warning flasher can be activated regardless of the ignition switch position.

Turn on the hazard warning by pushing the hazard warning flasher switch. Turn it off by pushing the switch again.

NOTE
When the hazard warning flasher is on, the turn signals do not work.

See also:


Cautions on the handling of 4-wheel drive vehicles
Tyres and wheels Since the driving torque can be applied to the 4 wheels, the driving performance of the vehicle when operating in 4-wheel drive is greatly affected by the condition of the tyres. Pay close attention to the tyres. ● Insta ...

Ignition switch
- Never turn the ignition switch to “LOCK” while the vehicle is being driven or towed because that will lock the steering wheel, preventing steering control. And when the engine is turned off, it takes a much greater effort than ...